StoArmour Facade Panel System
Solid Construction with Lightweight Concrete
Overview
Autoclaved Aerated Concrete (AAC) has evolved into an innovative lightweight concrete building material used worldwide in various construction systems.
StoArmour Facade Panel embodies the latest in AAC technology with corrosion resistant ductile steel reinforcing, delivering a durable facade panel from a dependable supplier.
The StoArmour Facade Panel System finished in the StoArmat Miral Render System has passed a series of stringent compliance tests for commercial and residential construction, providing a superior weathertight and fire resistant facade system with good sound insulation properties and impact resistance.
Brochure
 |
 |
 |
 |
StoArmour Panel
StoArmour Panels are available 50 mm thick x 2200 mm long x 600 mm wide, or 75 mm thick x 2200 mm long x 600 mm wide. They are installed horizontally over a 20 or 40 mm deep ventilated drainage cavity. The StoArmour Panel, with its aerated composition, provides insulation, fire and sound resistant properties recommended in the construction of today‘s residential and multi-level properties.
Benefits |
|
StoArmat Miral Render System
over StoArmour Facade Panel
A BRANZ appraised high-performance render system providing exceptional crack resistance and weather protection. The system includes a stay-dry sealer for the StoArmour facade panel and uPVC flashings to lock into junctions and joinery forming a neat weathertight seal. The system includes a mineral-basecoat render, followed by StoArmat synthetic render with fibreglass mesh, providing engineered reinforcement to reliably dissipate tensile, seismic and shear stress. The system is finished in your choice of Stolit coloured finishing render and StoColor facade paint or clear sealer, for performance and protection that surpasses the facade durability requirements.
Installation is carried out by a Sto Registered Contractor (Licensed Building Practitioner) and comes with the added protection of a StoArmat 15 or 20 Year Warranty with StoService Assurance, including a service plan to deliver long-term performance.
StoArmat Miral Render System over StoArmour Facade Panel
Click on each of the layers below to view the components of the system.
01
Building Frame with Building Wrap or RAB
02
Cavity Batten
High-density polystyrene battens or timber spaces.
03
Substrate: StoArmour Facade Panel
A solid, steel reinforced lightweight concrete panel (AAC).
Dimensions: 50 mm thick x 2200 mm long x 600 mm wide, or 75 mm thick x 2200 mm long x 600 mm wide.
04
Sealer: S-Protect WS205 Silane
Stay-dry sealer for AAC materials.
05
Basecoat: StoLevel Novo
Lightweight mineral render with good adhesion properties, water retention agents and machine application properties.
07
Plus: Sto Glass Fibre Mesh 4/7mm
Easy to install, meets the highest requirements for crack, stress and alkalinity resistance.
06
Reinforcement Render: StoArmat Render
An organic, weather resistant, cement-free and breathable, high-impact render, with a crack resistance six times higher than that of standard cement-based plasters.
06
Finishing Render: Stolit Renders
Organically bound, highly weather resistant, strong, hard-wearing, impact-resistant, pre-coloured finishing renders. (No cement)
Stolit K Range
Stolit MP & MP Natural
Stolit Milano
07
Coating:
StoColor coating based on IQ Technology for functional facades or a StoClear Sealer.
StoColor Maxicryl
StoColor Lotusan
StoColor X-black
StoClear Sealer
BRANZ Appraisal 772
StoArmat 15 or 20 Year Warranty with StoService Assurance
StoMiral Render System
over StoArmour Facade Panel
The StoMiral Render System is a BRANZ appraised, high-performance, cost-effective render system, that builds on the recognised stability of solid construction. The system includes a stay-dry sealer for the StoArmour facade panel and uPVC flashings to lock into junctions and joinery forming a neat weathertight seal. Followed by the application of a fibreglass mesh reinforced mineral base coat render. The system is finished in your choice of Stolit coloured finishing render and StoColor facade paint or clear sealer.
Installation is carried out by a Sto Registered Contractor (Licensed Building Practitioner) and comes with the added protection of a Sto 15 Year Warranty with StoService Assurance, including a service plan to deliver long-term performance.
StoMiral Render System over StoArmour Facade Panel
Click on each of the layers below to view the components of the system.
01
Building Frame with Building Wrap or RAB
02
Cavity Batten
High-density polystyrene battens or timber spaces.
03
Substrate: StoArmour Facade Panel
A solid, steel reinforced lightweight concrete panel (AAC).
Dimensions: 50 mm thick x 2200 mm long x 600 mm wide, or 75 mm thick x 2200 mm long x 600 mm wide.
04
Sealer: S-Protect WS205 Silane
Stay-dry sealer for AAC materials.
05
Basecoat: StoLevel Novo
Lightweight mineral render with good adhesion properties, water retention agents and machine application properties.
06
Plus: Sto Glass Fibre Mesh 4/7mm
Easy to install, meets the highest requirements for crack, stress and alkalinity resistance.
05
Sealer: StoPlex W
Water-based, siloxane-enhanced sealer with water repellent and stability properties.
06
Finishing Render: Stolit Renders
Organically bound, highly weather resistant, strong, hard-wearing, impact-resistant, pre-coloured finishing renders. (No cement)
Stolit K Range
Stolit MP & MP Natural
07
Coating:
StoColor coating based on IQ Net Technology for functional facades or a StoClear Sealer.
StoColor Maxicryl
StoColor Lotusan
StoColor X-black
StoClear Sealer
BRANZ Appraisal 772
Sto 15 Year Warranty with StoService Assurance
Finishes
Stolit: Coloured Finishing Renders
Stolit organic finishing renders are manufactured in Germany incorporating the latest technology. They are certified globally and have been successfully applied to rendered substrates in every climatic zone for over 50 years.
The Stolit range provides the perfect combination of properties: durable, strong, hard-wearing, impact-resistant, malleable, weather-resistant, colour-stable and highly resistant to microorganisms. In addition, its vapour permeability allows your building to breathe while still repelling water.
Coloured Self-Gauging Float Finish Renders: |
|||
 |
 |
 |
 |
Stolit K 1.0mm |
Stolit K 1.5mm |
Stolit K 2.0mm |
Stolit K 3.0mm |
Coloured Fine Float, Sponge, or Light Adobe Finish Renders: |
|||
 |
 |
 |
|
Stolit MP |
Stolit MP Natural |
Stolit Milano |
Facade Paints
StoColor facade paints are a range of a serviceable coatings embodying intelligent technology for a range of surface functions to compliment the architectural structure and design. The StoColor System, with 800 shades, AC Architectural Colors, or matched to any colour using the Sto Spectrometer, provides a clear framework and systematic approach to colour based on integrated layers, combining texture and colour for aesthetic appeal.
Product |
StoColor Maxicryl |
StoColor Lotusan |
StoColor X-black
|
Data Sheets
Download a Data Sheet:
Technical Datal Sheet (TDS) / Material Saftey Data Sheet (MSDS) / Sustainability Data Sheet (SDS)
Facade Panel:
Primers / Sealers:
Reinforcement Mesh:
Reinforcement Render / Base Render:
Finishing Renders:
Coatings:
Clear Coatings:
Specifications & BRANZ Appraisal
Download a Technical Specification
Please register all completed Sto specifications to info@sto.co.nz to ensure project confirmation and Sto warranty.
Download a BRANZ Appraisal
CAD or PDF Details
Download a Detail Set
Download an Individual Detail
Drawing Register and Introduction Series 000
Panel Layout Series 100
Foundation Series 200
Wall Series 300
Wall Penetrations & Fittings Series 350
Joinery Series 400
Parapets, Balustrades, Decks Series 500
Soffits Series 600
Roof Series 700
Dissimilar Material Series 800
Weatherboard Series 800
Brick Series 810
Rendered Fibre Cement Sheet Series 820
Concrete Block Series 830
StoTherm Panel EIFS Series 840
Profile Metal Series 850
Flat Sheet Cladding Series 860
Dissimilar Joinery Series 870
Timber Joinery
StoArmour Facade (40mm Cavity) Series 1000
Moldings and Shapes
Refer to - www.accumen.co.nz
Lightweight exterior decorative moldings and shapes, including columns, architraves, cornices, window sills, fence caps, quoins that can be finished in Stolit K or MP sponge
coloured finishing render.
Note: Decorative mouldings require min. 10° slope to top surface and a drip edge.
Click here to hide details.
Disclaimer: These drawings have been issued as a guideline. The sequence work covers various building components, each trade is responsible to ensure their elements are fully installed, including all waterproofing / sealant / flashings as is applicable.